top of page

Cell Phone Dealer's Group

Public·50 members

Buy Hp 8600 Printhead [WORK]

My printhead dried up and I could not clean it sufficiently to make it work. So, I bought a new one. That one didn't work. So, I bought a second new one that also doesn't work. ERROR MSG: There is a problem with the printer or ink system. Turn printer off, then on, If problem persists, contact HP.

buy hp 8600 printhead

I have tried, multiple times, every widget, suggested repair procedure, HP Smart, HP Support Assistant and none of them can solve the problem. Since this issue is related strictly to the printheads there shouldn't be any problems with the printer itself. The issue should have been solved with a new printhead. I'm beyond frustrated as I've been trying to solve this problem for atleast two months and I cannot contact HP to get some support. I'll pay for the help/support if that's even available, because I really like this printer.

My printer was working fine, then it had a pretty bad paper jam. I cleared all of the jammed paper, but now I have an error message that says, "The printhead appears to be missing, not detected, or incorrectly installed." I have tried everything - removing the ink cartridges, removing the ink carriage, reinstalling the carriage and ink, restarting the printer, etc... Nothing seems to be working. Do I need to purchase a new print head? Is there anything else I can do to fix this?

This is exactly what happened to me. Replaced Magenta and then started getting printhead errors and I can do nothing with this printer. I am only 3.5 months out of warranty. Are you serious, the answer is to buy a new printer????? I just replaced the last ink cartridge that came with my new 8600 printer and now your answer is to go out and buy a new 8600 printer. I bought an HP because I thought you guys had a good reputation. No way an 8600 printhead should fail with light use (lets see how many pages can be printed with the supplied ink cartridges when purchased new - not many) 3 months after warranty. Why would a printhead that was working perfectly fine before I replaced the last ink cartridge that was supplied at purchase. Something seems hinkey about this.

I have a problem with my printer's printhead and I have been adviced to buy a new one which is not available here at my country. I need an online supplier to order it from.. cause there are no sellers here to buy from! and how much do you think will it cost me?

one month out of warranty and on my third print head before I realized this must be HP's business model. The second print head did not have a warranty since the device was under warranty, HP would not honor the normal warranty that printheads carry. So yes, the new print head for the HP is $140 this month. It had been less last year, around $125. Three paper jams = three printheads. This was not taken into consideration when Consumer Reports classified it as a good buy. The only thing it is reliable to do is need more printheads.

The printhead is a printer component that helps transfer ink onto the page. It does this by firing tiny droplets of ink via numerous printer nozzles to create a desired print. When one of these nozzles gets clogged your prints appear faded or streaky.

Printer cartridges with a built-in printhead are called integrated printer cartridges. With this type, the nozzle plate (printhead) is built into the side of the cartridge. Every time you replace one of these printer cartridges you are also replacing the printhead, so if you are having a hard time with a particularly streaky cartridge, swapping it out with a brand new cartridge will usually solve your print quality problem. HP only sells integrated printer cartridges in black and tri-color and they are often used in cheaper Deskjet and ENVY printer models like the Deskjet 1112 or the ENVY 7855.

Before we continue, you need to know that some HP inkjet printers come with a built-in printhead separate from the ink cartridges, and there are also some HP inkjet printers with printheads built into the individual ink cartridges.

Manually cleaning a printhead that is built in to your printer takes a bit more work. The steps below are for HP printers that have a removable printhead, like the HP OfficeJet 8710. You can also uses this method on non-HP printers with printheads built into the printer.

"@context": " ","@type":"FAQPage","@id":" -to-clean-an-hp-printhead#FAQPage","url":" -to-clean-an-hp-printhead","mainEntity": ["@type": "Question","@id":" -to-clean-an-hp-printhead#Question_01","name": ["What is a printhead?"],"acceptedAnswer": "@type": "Answer", "text": "The printhead is a printer component that helps transfer ink onto the page. It does this by firing tiny droplets of ink via numerous printer nozzles to create a desired print. When one of these nozzles gets clogged your prints appear faded or streaky.","@type": "Question","@id":" -to-clean-an-hp-printhead#Question_02","name": ["What are the types of HP printheads?"],"acceptedAnswer": "@type": "Answer", "text": "There are intregrated printhead cartridges and there are printheads built into the printer. Printer cartridges with a built-in printhead are called integrated printer cartridges. With this type, the nozzle plate printhead is built into the side of the cartridge. The nozzle plate printhead for these types of cartridges is included in the printer and the cartridges install into that printhead to create a print." ]

The black ink cartridge or the black nozzle on the printhead could be blocked. Try the paper towel method to remedy this: -to-clean-an-epson-printhead/. This article is about cleaning an Epson printhead but the process should be similar with an HP 4620 printhead.

hp photosmart 7520 says printhead appears to be missing.not detected or incorrectly installed. cleaned as instructed by above cleaning instructions several times ,have changed all cartridges twice. is my solution : get a new printer??

Since printheads are pretty expensive, you might consider replacing the cartridges first to see if that clears up the problem. If not, you can either replace the printhead or buy a new printer. A new printer can often be cheaper than a replacement printhead!

I changed the cartridges, but the yellow seems to be the issue. It has a greenish- brown color to it. When I looked at the printhead, it looks green/black. Is there a way to fix this without having to get a new printhead?

I bought a set of cartridges for my HP 8510, online for about $20 instead of paying $130.00 at my local store. They were shipped with a piece of plastic on the nozzle outlet, and my wife found the cartridges in a box, and did not know to pull the plastic off. I think there is a piece of plastic in the printhead at this point, please advise.

Hi Elizabeth, did you try running the cleaning function on the OfficeJet 6962? The cartridge may just need to be primed. From the printer display screen, select the set up icon (it looks like a gear) then select Printer Maintenance and then run the cleaning function. If print quality does not improve, try running it a second or third time. After running, you can also align the printheads.

Hi Miriam, try running the automatic printhead cleaning function on your Photosmart. To clean printhead from the printer display screen, touch the Settings icon, and then touch Tools. On the Tools menu, touch Clean Printhead. You can also find instructions in the user guide here:

Yes, you likely need to replace the printhead if that message pops up. You can try doing a hard reset on the printer first to see if that will clear the message. To do this, remove the cartridges from the printer, power it down, unplug it from the wall for about a minute, then plug it back in, power it on, reinstall the cartridges and try printing again.

Use printer's built-in function. HP has three levels of cleaning. At the first level, HP will wipe the printhead clean. If the print is undesirable and you selected "continue", the printer will move to second and third cleaning level. At these levels, the printer will inflate and deflate an air bladder inside the cartridge. Ink will be squeezed out the cartridge and thus push clogs out of printhead.

1. Wash the bottom of printhead under hot water. The temperature of the household water will not be high enough to damage the printhead so that you can turn the water to the highest setting. Wash it for 2-5 minutes.

Step Three. Dry the circuit board with paper towels. Do not wipe the bottom of the printhead. Fibers from paper towel will block the micro-openings of the printhead which will damage the printhead permanently. Make sure you dry the circuit board completely otherwise your printer will think the printhead is damaged. It is okay to leave the bottom of printhead wet. You can use lint-free lens paper to dry the bottom.

5. Remove the ink cartridges, then remove the printhead. Reinstall the printhead, and reinstall the ink cartridges. Note that HP's documentation states you sometimes have to do this 3 or even 4 times for it to take effect. You can see this in HP's documentation on their website about resolving this error. As shown on HP's webapge, and also a video hosted by . There are also videos on Youtube which show this.

What size/type bit do I need to remove those two "screws" that hold the board onto the printhead? None of the bits I have seem to fit it (all too large). I'm sure I can order it from iFixIt, but need to know what I need first.

I learned much reading this post. I ordered the print head replacement from amazon but returned it for a refund less a 10% gouge from the non-Amazon seller to put it back on his shelf. I did not know about the need for starter cartridges. The reason I returned the printhead is because after I received the PH I went to Best Buy and found a new HP OfficeJet 8600 multi-function machine on sale for approximately 85% of MFR Suggested Retail price. Plus I think they gave me money for recycling my old machine. My background includes 20 years in the Navy working at the intermediate maintenance level. This level of maintenance is usually more involved than organizational (or line) maintenance. When a fix involves replacing a CMOS battery or printhead, and HP has set up a means for recycling (or renovating, or refurbishing) their equipment I bow and get out of the way. 041b061a72


Welcome to the Cell Phone Dealer's group! You can connect wi...
bottom of page